Remote Product Development

For general remote controller enclosure, there will be top cabinet, bottom cabinet, battery door, lens, and rubber keypad. Additional parts are light guide, inlay, keycap

There are various key actuation methods for remote control. Rubber Keypad ? The most common and simple method ? It provides adequate key actuation feeling

Product Assembly Product assembly process should be considered early in design stage.For environmental recycle purpose, one sub-assembly parts that is difficult to separate in disposal

Industrial 4.0 is the advancement of manufacturing and industrial application by integrating modern large-scale machine-to machine communication (M2M) and the industrial internet of things (IIoT)

A micro controller unit (MCU) is an integrated circuit consists of processor core (CPU), memory (RAM and ROM), and programmable input/output peripherals (I/O). It is

Diode, It is the basic component in a circuitry. Diode is used to control the directional flow of electric current in the circuitry. Resistor and

For RF product, it may need another IC, RF transceiver, for communication and special SAW resonator to work in different frequency range. SAW Oscillator SAW

Backlight on device makes key button or LCD glow at dim environment for better user experience. There are 3 main streams of backlight. CCFL ?

A printed circuit board, PCB, is mechanically support electronic components that connected by signal traces that etched from copper foil over a non-conductive board. A